Hi all. I have a 69 Bus restoration project going and I started with
the brakes. I have replaced the master cylinder and all associated
parts. I have not replaced the wheel cylinders or anything else yet,
my intent was to flush the system first, then replace the wheel
cylinders etc. All was well until I got to the right rear wheel and
to my surprise no fluid came out. I broke the system down and now
know the hard line is clogged, the one from the master to the right
rear. It is not the rubber line. Dose anyone know how to clear a
clogged line? I thought about compressed air, however I have no idea
how to make the hook up. Thanks in advance, Bill